Velleman

DUAL ELECTRONIC DICE
K3400

Board games provide an excellent source of pleasant and healthy entertainment. However, the dice can be a constant source of distraction : they fall off the table, allow cheating, one or more players don't see the results properly and so on. There can be no doubt at all about the result displayed on this electronic dice module, and cheating is out of the question. Two fully independent dice. At your choice you can play with one or two dice. Displays are switched off automatically after 30 seconds to save battery power.

Specifications

• power supply : 8 to 12VDC or 6VAC / 60mA

• PCB dimensions : 76 x 70mm

• recommended housing : BA4

• recommended transformer : 1060012M

• recommended adapter : PS905

ELECTRONIC RECORD/PLAYBACK MODULE
K8030

High-quality, natural voice/audio reproduction. Can be used to greet visitors, play pranks, warn burglars,… EEPROM technology with 100-year message retention. Microphone included. Up to 20 seconds of recording time per module. No memory loss in case of power failure. Loudspeaker and line-out included. 2 Playmodes : Push once to play message / Play message until button is released. Add an optional rotary switch (8404-1C) for message selection.

Specifications

• 8 ~ 16 ohm, 12mW speaker output

• power supply : 8 - 18Vdc, or 6V battery (4 x AA of AAA)

• power consumption :

  • DC power supply : 4mA in standby, max 100mA when playback

  • battery operated : 20µA in standby, max 100mA when playback

• sampling frequency : 6.4KHz

• dimensions : 94 x 73 x 25mm (3.7" x 2.9" x 1")

MULTITONE CHIME
K6600

Specifications

• adjustable tone and volume control

• 1, 2 or 3 tones selectable

• loudspeaker output : 0.3W / 8ohm

• power supply : 6 to 9VAC / 0.2A or 4.5V battery (3 x 1.5V AA batteries (not incl.))

• idle current : less than 10µA

• dimensions : 53 x 59mm

• usable battery housing : BH331B

• recommended housing : WCAH2851, G416 or G410

• recommended transformer : 1090025M

• recommended adapter : PS905AC

10-CHANNEL, 2-WIRE REMOTE CONTROL
K8023

This kit allows you to control up to 10 devices using only 2 wires at a long distance. Microprocessor controlled. Inputs can be push-buttons, switches or open collector outputs from another device. The receiver section provides 10 open collector outputs that allow you to control relays directly. Terminal block connectors for all input and output connections are included. All outputs are provided with LED indication. Can be used with our kits : K6711, K8000, K8006,... Can be connected to our standard relay card : K6714.

Specifications

• 10 open collector outputs : 50V / 100mA

• tested to a distance of up to 50m (55 yards) between control- and receiver section

• operating voltage : single 12-15V AC or DC, 300mA

• dimensions control pcb : 70 x 50 x 16mm (2.7" x 2.0" x 0.6")

• dimensions receiver pcb : 103 x 50 x 24mm (4.0" x 2.0" x 1.0")